 |
| On2 Peel & Stick Tie-Strips Introducing Laser Milled, Drilled and Cut, Peel & Stick Tie-Strips Laser cut from 1/16 inch thick basswood, these Tie-Strips are "self-gauging" by means of laser-milled "grooves" which locate both Code 70 and 83 rail. Each tie has four spike holes pre-drilled by the laser. |
| Simply locate where the track is to be, peel the backing from the Tie-Strip and press in place. The milled grooves are exactly the width of the Base on Code 70, or Code 83 Rail. These grooves, along with the pre-drilled Spike Holes, "automatically" gauge the rail as you spike it to the ties..... As the strips are cut in a fashion similar to commercial "Flex-Trak" they can be easily curved. In the close-up photo, the ties have been "distressed" with a sharp #11 Hobby Blade. Then, the "standard" India Ink and Alcohol stain was brushed on. |
| Our Tie-Strips Are Now Available In Four Inch Lengths. Additionally, we are working on Left and Right #8 Turnout Tie-Strips You may order Tie-Strips for Code 70 Rail as follows: One 4" X 4" Sheet Containing Four 3-1/2" Strips (Approx. 14 Lineal Inches) For $8.50 Or, Six 4" X 4" Sections (Approx. 84 Lineal Inches) For $41.00 Our "Random Spaced" Tie-Strips for Code 70 Rail are now available!!! Prices above do not include S&H, See Ordering Information for additional. |
|
 |
 |
| SHOWN HERE IS OUR FIRST On2 TIE-STRIP RELEASE 5" X 5" X 5'-0" PROFILE TIES FOR CODE 70 RAIL WITH 20" SPACING BETWEEN TIES. TIES ARE CUT FROM 1/16" THICK "PEEL & STICK" BACKED BASSWOOD WITH SELF GAUGING GROOVES FOR CODE 70 RAIL, WITH FOUR PRE-DRILLED SPIKE HOLES PER TIE. SEE BELOW FOR PRICING AND ORDERING INFORMATION. |
| THESE SETS ARE AVAILABLE NOW!! (11-07-02). |
 |
| Tie-Strips in On2 |
| Plus, we now have O Scale 24" and 30" DUAL GAUGE Tie-Strips available! See them on the ON30 Tie-Strip Page. |