POSSIBLE NEW PRODUCTS
. Most everything shown on this page, involves laser cutting and is presented to show the possibilities
of what could be made available to small groups, the open market, or other manufacturers.
The left photo shows the Pilot Model of PE Freight Locomotive 1552. The model will include a
laser cut 1/16" thick acrylic (Plexiglas) frame, which is concealed by the wood floor an side sills.
Doors and windows are positionable, either open or closed. Laser scribed and cut, sticky backed
bond paper is used for the hinges, roofing and steel plating. Wood frames with adhesive backing
support fine mesh silk screen material on side hood doors.

The photo on the right is of an arched window trolley wall. It just gives some idea
of what "layering" laser cut Peel & Stick wood can do for Trolley modelers!
Pictured here are some laser cut
replacement doors and roofwalks
for the Bachmann Brill.

Complete wood replacement sides
are possible too! Click below to view
the "Line Car" built using the
Bachmann Brill as a starting point.
IF ANY OF THESE PRODUCTS ARE OF INTEREST TO YOU, PLEASE LET ME KNOW BY EMAIL
Here we have laser cut acrylic glazing for the Bowser PCC. This is just like the glazing we make for the "Diesel" modelers. The only modification is the removal of the oversized safety bars from the window openings.
The Headlight "Wings" are laser cut from a self adhesive chrome plastic.
I also have laser cut, peel & stick PCC Wheel Covers available, as seen in the photo, lower left.
HOME Double Truck Birney