372
373
374
375
376
Window Set - Part #372
Contains; 14 Double "Section" Panes,
7 Aisle Window Panes,
4 Vestibule Side Door Window Panes and
2 Interior Vestibule Door Panes.
Enough glazing for all, currently available,
Branchline Pullman Kits.
MSRP = $6.95
Window Set - Part #373
Extended Diamond Lavatory Window Set
For
Branchline 8-1-2 Pullmans
MSRP = $5.95
Window Set - Part #374
"Fountain" Style  Lavatory Window Set
For
Branchline 8-1-2 Pullmans
MSRP = $6.95
Window Set - Part #375
"Fountain" Style  Lavatory Window Set
For
Branchline 12-1 and 10-1-2 Pullmans
MSRP = $4.95
Window Set - Part #376
"Fountain" Style  Lavatory Window Set
For
Branchline 12-1 and 10-1-2 Pullmans
MSRP = $5.95
369
"Adjust-A-Knuckle" - Part #370
Adjustable "Drawbars" for Increasing, or Decreasing,
the Coupler Extension Distance Between Cars.
Reduces "Gap-Osis" and can be used with 369 to
provide Variable Flexibility to "Fine-Tune"
your cars for varying track radii.
MSRP = $6.95
Click Here To View
369's Instructions
Click Here To View
372's Instructions
Click Here To View
374's Instructions


374's Instruction
shown, are the same
as 373, 375 and 376,
except for Parts Numbers and Parts Drawings
377
Section Dividers - Part #377
"Half- Height" Section Dividers attach to Pullman Section Seat tops to
give passengers some Privacy. Enough for 14 Sections
MSRP = $4.95
Click Here To View
377's Instructions
378
Section Dividers - Part #378
"Full- Height" Section Dividers attach to Pullman Section Seat tops to
give passengers some Privacy. "Arches" are based on prototype's design, and
"span" from seats on one side of car, above and across aisle to other seat back. Offers prototype appearance and provides interior "sight blocks" for realism.
Eight per Set  MSRP = $4.95
Window Glazing and Accessories for
Branchline Heavyweight Pullmans
370
Diaphragm Shims - Part #369
.016" Thick Double Peel & Stick Shims
Offset Branchline Diaphragms from End Walls
of Car to Reduce "Gap-Osis" Between Cars when
Coupled - Set includes Four Shims For Two Cars
MSRP = $3.95
371
Antimacassars - Part #371
Laser Scribed and Cut, White
Antimacassar ("Tidies") Decals
Enough for 1 to 2 Cars
MSRP = $3.95
Click Here To View
371's Instructions
Back To New Releases
Back To Home Page
05-26-05 This Page is Still Under Construction. There are Several More Items to be Added.
There Will Also Be A Separate Page For All Of Our Windows And
Accessories For The Walthers Heavyweight Pullmans.
Email For More Info.
380
381
382
Shade Sets - Part(s) #380, Green
#381, Buff and #382, Gray.
#383 - "Aluminum" TBA
Laser Cut Shade Sets - Each Set
Can Be Mixed & Matched To Equip
Three to Four Cars.

MSRP = $8.95
"Click" Photo For Instructions
Model Construction, Photography, Photoshop Work by J. Hitzeman - Copyright/All Rights Reserved 2005
Ordering Information
385
"Reinforcement" Section Dividers 
Part #385

Identical in appearance to Part 378, these
Arched Section Dividers are cut from
1/32" thick acrylic (plex). 

They are sized so that they are .005" narrower on both sides (total .010") than the interior width
of the car body. When glued to the interior "face"
of the sides, these dividers pull the sides inwards
so that bowed roofs will tightly "snap" into place
and be held there.

Three per Set  MSRP = $6.95
See The Two Photos
Below For Views Of
Parts 377, 378 & 385.

Instructions To Be
Posted Soon.
Click Here To View
370's Instructions
379
"Thin Section" Pantograph Gates - Part #379
Delicately Cut from 1'64" Thick Resin Board, these
Pantograph Style Vestibule End Door Safety Gates add
Extra Realism to Your Models.

Four per Set  MSRP = $4.95
Click Here To View
379's Instructions
If You Don't See It Here --- Email With Questions
You Can See Many Of These Parts Utilized In Bruce Smith's Article in the
November 2007 On-Line Issue of "The Keystone Modeler"

Courtesy Of The Pennsylvania Railroad Technical & Historical Society.
Viewed With Adobe Reader